+1 646 741 3517 instanthelp123@gmail.com

(solved) Linux Networking

$34.00

Referencing Styles : APA Part 1 – Setting up a NetworkYou are required to set up a network consisting of a PC, router and server. The router will have two ethernet network interfaces and be configured to route network traffic between them. The PC (client) will be connected to one of the router’s interfaces and another PC (server) will be connected to the router’s other interface.Client <--> Router <--> ServerEach side of the router will be in its own LAN segment and should have a different network address, u … View More Part 1 – Setting up a Network You are required to set up a network consisting of a PC, router and server. The router will have two ethernet network interfaces and be configured to route network traffic between them. The PC (client) will be connected to one of the router’s interfaces and another PC (server) will be connected to the router’s other interface. Client <--> Router <--> Server Each side of the router will be in its own LAN segment and should have a different network address, use private IP address ranges for each LAN Segment. Perform the following activities and support your workings with screenshots[10 marks]: 1. Configure the PC, Server and Router interfaces with appropriate network addressing; 2. Configure routing (IP packet forwarding) on the router; 3. On the client ping the client’s own network interface, then the local router gateway interface, then the remote (server side) router interface, then the server; 4. Use the traceroute command from the client to the server. Include results of the traceroute in your submission. Part II – Configuring Network Services Perform the following activities [15 marks]: 1. DNS: Configure a DNS Server on the server device and demonstrate that forward and reverse DNS are working from the client PC; 2. DHCP: Configure DHCP on the server and show that the client PC has successfuly recieved an IP Address and other network parameters (default router, netmask, DNS) using DHCP; 3. Firewall: Configure traffic filtering on the router to block network traffic between the two lan segments, and then unblock traffic between them. A series of screen shots with commentary on each of the required tasks is to be submitted. The submission has to include an explanation of the tasks and all the commands used alongwith the output (or final result) in report format. Read Less

Reviews

There are no reviews yet.

Be the first to review “(solved) Linux Networking”

Your email address will not be published. Required fields are marked *